Getting Started with Your Alocity AiVR Intelligent Video Recorder
Welcome to the Alocity AiVR Intelligent NVR (Cloud Bridge - AI Analytics Server) Installation Guide! In this guide, we will walk you through the steps to properly install and prepare your Alocity AiVR to ensure a smooth video system deployment and integration with the Alocity Control Center. Follow the steps below to get started.
Step 1: Conduct a Site Survey
Before installing your Alocity AiVR, conduct a site survey to determine the following:
-
The number and location of IP cameras that will be connected
-
Whether the AiVR will connect to a PoE switch or an isolated network segment
-
Where the AiVR will be installed (preferably an IT room, cabinet, or rack)
-
Whether your setup will use local storage, cloud storage, or a hybrid of both
Step 2: Installation Prerequisites
Ensure the following conditions are met before starting the installation:
-
Installation must be performed by a certified technician
-
Power Requirement:
-
AiVR8 12V – 5A (60W) external power supply (included)*
- AiVR16 24V - 5A (120W) external power supply (included)*
-
-
Connect the power supply to a 120V/240V~1.7A to 2.0A outlet using a voltage regulator, professional-grade power strip, or UPS for optimal protection and backup
-
Wired Ethernet connection is required for setup — DHCP or Static IP supported
-
The AiVR must be on the same local network as all connected IP cameras
-
All cameras must be RTSP compliant.
-
An active internet connection is required for remote management via the Alocity Portal
-
You must have an Alocity Control Center admin account to proceed with setup
Step 3: Parts Included
Ensure the following components are included in the AiVR packaging:
-
1x Alocity AiVR Unit
-
1x 12V Power Supply
Step 4: Required Tools and Environment
Prepare the following tools and installation environment:
-
Access to a 120V AC power outlet
-
Network switch or router with at least one available Ethernet port
-
Rack, cabinet, or ventilated surface with stable airflow and minimal dust
Note: The AiVR is fully managed through the Alocity Control Center. A local monitor, mouse, or keyboard is not required for configuration or operation.
Installation:
Before proceeding with the installation, it is important to ensure that your network meets the necessary requirements.