Basic Software Configurations
      Back to home
      1. Alocity Help Center (Knowledge Base)
      2. Alocity Control Center Guide
      3. Basic Software Configurations

      Door Settings

      In door settings you can configure the relay, request to exit, door contacts, and wiegand input/outpu

      

      Relay

      The device comes with an internal relay that you can connect directly to an electronic locking mechanism.
      

      To activate the device’s internal relay
      

        

      1.  Select Doors from the menu
        2. 

      2.  Select the door/device from the list
        3. 

      3.  Go to the Settings Tab
        4. 

      4.  Checkmark Internal Relay
        5. 

      5.  To save click on update.
        6. 

      

      

      For the relay wiring instructions, see the Alocity F3D100 installation guide.
      

      I/O Relay-  The Alocity Secure I/O Controller provides an additional layer of security for external doors. When door locks are connected directly to the F3D100's internal relay, the system may be more vulnerable to tampering and unauthorized access from the outside. Utilizing the Secure I/O Controller helps mitigate this risk  by offering a more secure connection, making it more difficult for intruders to bypass the access control system.
      

      To activate the device’s external relay on the Alocity secure i/o controller
      

        

      1. Click on "Doors" in the menu.
        2. 

      2. Choose the desired door/device from the list.
        3. 

      3. Navigate to the "Settings" tab.
        4. 

      4. Enable either "I/O Relay 1" or "I/O Relay 2" by checking the appropriate box.
        5. 

      5. Click "Update" to save your settings.

        6.